<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://java.sun.com/xml/ns/j2ee"
xmlns:j2ee="http://java.sun.com/xml/ns/j2ee"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
version="2.4">
<xsd:annotation>
<xsd:documentation>
@(#)web-app_2_4.xsds 1.60 03/08/26
</xsd:documentation>
</xsd:annotation>
<xsd:annotation>
<xsd:documentation>
Copyright 2003 Sun Microsystems, Inc., 901 San Antonio
Road, Palo Alto, California 94303, U.S.A. All rights
reserved.
Sun Microsystems, Inc. has intellectual property rights
relating to technology described in this document. In
particular, and without limitation, these intellectual
property rights may include one or more of the U.S. patents
listed at http://www.sun.com/patents and one or more
additional patents or pending patent applications in the
U.S. and other countries.
This document and the technology which it describes are
distributed under licenses restricting their use, copying,
distribution, and decompilation. No part of this document
may be reproduced in any form by any means without prior
written authorization of Sun and its licensors, if any.
Third-party software, including font technology, is
copyrighted and licensed from Sun suppliers.
Sun, Sun Microsystems, the Sun logo, Solaris, Java, J2EE,
JavaServer Pages, Enterprise JavaBeans and the Java Coffee
Cup logo are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
Federal Acquisitions: Commercial Software - Government Users
Subject to Standard License Terms and Conditions.
</xsd:documentation>
</xsd:annotation>
<xsd:annotation>
<xsd:documentation>
<![CDATA[
This is the XML Schema for the Servlet 2.4 deployment descriptor.
The deployment descriptor must be named "WEB-INF/web.xml" in the
web application's war file. All Servlet deployment descriptors
must indicate the web application schema by using the J2EE
namespace:
http://java.sun.com/xml/ns/j2ee
and by indicating the version of the schema by
using the version element as shown below:
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="..."
version="2.4">
...
</web-app>
The instance documents may indicate the published version of
the schema using the xsi:schemaLocation attribute for J2EE
namespace with the following location:
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd
]]>
</xsd:documentation>
</xsd:annotation>
<xsd:annotation>
<xsd:documentation>
The following conventions apply to all J2EE
deployment descriptor elements unless indicated otherwise.
- In elements that specify a pathname to a file within the
same JAR file, relative filenames (i.e., those not
starting with "/") are considered relative to the root of
the JAR file's namespace. Absolute filenames (i.e., those
starting with "/") also specify names in the root of the
JAR file's namespace. In general, relative names are
preferred. The exception is .war files where absolute
names are preferred for consistency with the Servlet API.
</xsd:documentation>
</xsd:annotation>
<xsd:include schemaLocation="j2ee_1_4.xsd"/>
<xsd:include schemaLocation="jsp_2_0.xsd"/>
<!-- **************************************************** -->
<xsd:element name="web-app" type="j2ee:web-appType">
<xsd:annotation>
<xsd:documentation>
The web-app element is the root of the deployment
descriptor for a web application. Note that the sub-elements
of this element can be in the arbitrary order. Because of
that, the multiplicity of the elements of distributable,
session-config, welcome-file-list, jsp-config, login-config,
and locale-encoding-mapping-list was changed from "?" to "*"
in this schema. However, the deployment descriptor instance
file must not contain multiple elements of session-config,
jsp-config, and login-config. When there are multiple elements of
welcome-file-list or locale-encoding-mapping-list, the container
must concatinate the element contents. The multiple occurance
of the element distributable is redundant and the container
treats that case exactly in the same way when there is only
one distributable.
</xsd:documentation>
</xsd:annotation>
<xsd:unique name="web-app-servlet-name-uniqueness">
<xsd:annotation>
<xsd:documentation>
The servlet element contains the name of a servlet.
The name must be unique within the web application.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:servlet"/>
<xsd:field xpath="j2ee:servlet-name"/>
</xsd:unique>
<xsd:unique name="web-app-filter-name-uniqueness">
<xsd:annotation>
<xsd:documentation>
The filter element contains the name of a filter.
The name must be unique within the web application.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:filter"/>
<xsd:field xpath="j2ee:filter-name"/>
</xsd:unique>
<xsd:unique name="web-app-ejb-local-ref-name-uniqueness">
<xsd:annotation>
<xsd:documentation>
The ejb-local-ref-name element contains the name of an EJB
reference. The EJB reference is an entry in the web
application's environment and is relative to the
java:comp/env context. The name must be unique within
the web application.
It is recommended that name is prefixed with "ejb/".
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:ejb-local-ref"/>
<xsd:field xpath="j2ee:ejb-ref-name"/>
</xsd:unique>
<xsd:unique name="web-app-ejb-ref-name-uniqueness">
<xsd:annotation>
<xsd:documentation>
The ejb-ref-name element contains the name of an EJB
reference. The EJB reference is an entry in the web
application's environment and is relative to the
java:comp/env context. The name must be unique within
the web application.
It is recommended that name is prefixed with "ejb/".
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:ejb-ref"/>
<xsd:field xpath="j2ee:ejb-ref-name"/>
</xsd:unique>
<xsd:unique name="web-app-resource-env-ref-uniqueness">
<xsd:annotation>
<xsd:documentation>
The resource-env-ref-name element specifies the name of
a resource environment reference; its value is the
environment entry name used in the web application code.
The name is a JNDI name relative to the java:comp/env
context and must be unique within a web application.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:resource-env-ref"/>
<xsd:field xpath="j2ee:resource-env-ref-name"/>
</xsd:unique>
<xsd:unique name="web-app-message-destination-ref-uniqueness">
<xsd:annotation>
<xsd:documentation>
The message-destination-ref-name element specifies the name of
a message destination reference; its value is the
environment entry name used in the web application code.
The name is a JNDI name relative to the java:comp/env
context and must be unique within a web application.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:message-destination-ref"/>
<xsd:field xpath="j2ee:message-destination-ref-name"/>
</xsd:unique>
<xsd:unique name="web-app-res-ref-name-uniqueness">
<xsd:annotation>
<xsd:documentation>
The res-ref-name element specifies the name of a
resource manager connection factory reference. The name
is a JNDI name relative to the java:comp/env context.
The name must be unique within a web application.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:resource-ref"/>
<xsd:field xpath="j2ee:res-ref-name"/>
</xsd:unique>
<xsd:unique name="web-app-env-entry-name-uniqueness">
<xsd:annotation>
<xsd:documentation>
The env-entry-name element contains the name of a web
application's environment entry. The name is a JNDI
name relative to the java:comp/env context. The name
must be unique within a web application.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:env-entry"/>
<xsd:field xpath="j2ee:env-entry-name"/>
</xsd:unique>
<xsd:key name="web-app-role-name-key">
<xsd:annotation>
<xsd:documentation>
A role-name-key is specified to allow the references
from the security-role-refs.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:security-role"/>
<xsd:field xpath="j2ee:role-name"/>
</xsd:key>
<xsd:keyref name="web-app-role-name-references"
refer="j2ee:web-app-role-name-key">
<xsd:annotation>
<xsd:documentation>
The keyref indicates the references from
security-role-ref to a specified role-name.
</xsd:documentation>
</xsd:annotation>
<xsd:selector xpath="j2ee:servlet/j2ee:security-role-ref"/>
<xsd:field xpath="j2ee:role-link"/>
</xsd:keyref>
</xsd:element>
<!-- **************************************************** -->
<xsd:complexType name="auth-constraintType">
<xsd:annotation>
<xsd:documentation>
The auth-constraintType indicates the user roles that
should be permitted access to this resource
collection. The role-name used here must either correspond
to the role-name of one of the security-role elements
defined for this web application, or be the specially
reserved role-name "*" that is a compact syntax for
indicating all roles in the web application. If both "*"
and rolenames appear, the container interprets this as all
roles. If no roles are defined, no user is allowed access
to the portion of the web application described by the
containing security-constraint. The container matches
role names case sensitively when determining access.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="description"
type="j2ee:descriptionType"
minOccurs="0" maxOccurs="unbounded"/>
<xsd:element name="role-name"
type="j2ee:role-nameType"
minOccurs="0" maxOccurs="unbounded"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="auth-methodType">
<xsd:annotation>
<xsd:documentation>
The auth-methodType is used to configure the authentication
mechanism for the web application. As a prerequisite to
gaining access to any web resources which are protected by
an authorization constraint, a user must have authenticated
using the configured mechanism. Legal values are "BASIC",
"DIGEST", "FORM", "CLIENT-CERT", or a vendor-specific
authentication scheme.
Used in: login-config
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string"/>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="dispatcherType">
<xsd:annotation>
<xsd:documentation>
The dispatcher has four legal values: FORWARD, REQUEST, INCLUDE,
and ERROR. A value of FORWARD means the Filter will be applied
under RequestDispatcher.forward() calls. A value of REQUEST
means the Filter will be applied under ordinary client calls to
the path or servlet. A value of INCLUDE means the Filter will be
applied under RequestDispatcher.include() calls. A value of
ERROR means the Filter will be applied under the error page
mechanism. The absence of any dispatcher elements in a
filter-mapping indicates a default of applying filters only under
ordinary client calls to the path or servlet.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string">
<xsd:enumeration value="FORWARD"/>
<xsd:enumeration value="INCLUDE"/>
<xsd:enumeration value="REQUEST"/>
<xsd:enumeration value="ERROR"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:simpleType name="encodingType">
<xsd:annotation>
<xsd:documentation>
The encodingType defines IANA character sets.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[^\s]+"/>
</xsd:restriction>
</xsd:simpleType>
<!-- **************************************************** -->
<xsd:complexType name="error-codeType">
<xsd:annotation>
<xsd:documentation>
The error-code contains an HTTP error code, ex: 404
Used in: error-page
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:xsdPositiveIntegerType">
<xsd:pattern value="\d{3}"/>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="error-pageType">
<xsd:annotation>
<xsd:documentation>
The error-pageType contains a mapping between an error code
or exception type to the path of a resource in the web
application.
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:choice>
<xsd:element name="error-code"
type="j2ee:error-codeType"/>
<xsd:element name="exception-type"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
The exception-type contains a fully qualified class
name of a Java exception type.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:choice>
<xsd:element name="location"
type="j2ee:war-pathType">
<xsd:annotation>
<xsd:documentation>
The location element contains the location of the
resource in the web application relative to the root of
the web application. The value of the location must have
a leading `/'.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="filter-mappingType">
<xsd:annotation>
<xsd:documentation>
Declaration of the filter mappings in this web
application is done by using filter-mappingType.
The container uses the filter-mapping
declarations to decide which filters to apply to a request,
and in what order. The container matches the request URI to
a Servlet in the normal way. To determine which filters to
apply it matches filter-mapping declarations either on
servlet-name, or on url-pattern for each filter-mapping
element, depending on which style is used. The order in
which filters are invoked is the order in which
filter-mapping declarations that match a request URI for a
servlet appear in the list of filter-mapping elements.The
filter-name value must be the value of the filter-name
sub-elements of one of the filter declarations in the
deployment descriptor.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="filter-name"
type="j2ee:filter-nameType"/>
<xsd:choice>
<xsd:element name="url-pattern"
type="j2ee:url-patternType"/>
<xsd:element name="servlet-name"
type="j2ee:servlet-nameType"/>
</xsd:choice>
<xsd:element name="dispatcher"
type="j2ee:dispatcherType"
minOccurs="0" maxOccurs="4"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="filter-nameType">
<xsd:annotation>
<xsd:documentation>
The logical name of the filter is declare
by using filter-nameType. This name is used to map the
filter. Each filter name is unique within the web
application.
Used in: filter, filter-mapping
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:extension base="j2ee:nonEmptyStringType"/>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="filterType">
<xsd:annotation>
<xsd:documentation>
The filterType is used to declare a filter in the web
application. The filter is mapped to either a servlet or a
URL pattern in the filter-mapping element, using the
filter-name value to reference. Filters can access the
initialization parameters declared in the deployment
descriptor at runtime via the FilterConfig interface.
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:group ref="j2ee:descriptionGroup"/>
<xsd:element name="filter-name"
type="j2ee:filter-nameType"/>
<xsd:element name="filter-class"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
The fully qualified classname of the filter.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="init-param"
type="j2ee:param-valueType"
minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:documentation>
The init-param element contains a name/value pair as
an initialization param of a servlet filter
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="form-login-configType">
<xsd:annotation>
<xsd:documentation>
The form-login-configType specifies the login and error
pages that should be used in form based login. If form based
authentication is not used, these elements are ignored.
Used in: login-config
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="form-login-page"
type="j2ee:war-pathType">
<xsd:annotation>
<xsd:documentation>
The form-login-page element defines the location in the web
app where the page that can be used for login can be
found. The path begins with a leading / and is interpreted
relative to the root of the WAR.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="form-error-page"
type="j2ee:war-pathType">
<xsd:annotation>
<xsd:documentation>
The form-error-page element defines the location in
the web app where the error page that is displayed
when login is not successful can be found.
The path begins with a leading / and is interpreted
relative to the root of the WAR.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="http-methodType">
<xsd:annotation>
<xsd:documentation>
The http-method contains an HTTP method recognized by the
web-app, for example GET, POST, ...
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string">
<xsd:enumeration value="GET"/>
<xsd:enumeration value="POST"/>
<xsd:enumeration value="PUT"/>
<xsd:enumeration value="DELETE"/>
<xsd:enumeration value="HEAD"/>
<xsd:enumeration value="OPTIONS"/>
<xsd:enumeration value="TRACE"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="locale-encoding-mapping-listType">
<xsd:annotation>
<xsd:documentation>
The locale-encoding-mapping-list contains one or more
locale-encoding-mapping(s).
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="locale-encoding-mapping"
type="j2ee:locale-encoding-mappingType"
maxOccurs="unbounded"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="locale-encoding-mappingType">
<xsd:annotation>
<xsd:documentation>
The locale-encoding-mapping contains locale name and
encoding name. The locale name must be either "Language-code",
such as "ja", defined by ISO-639 or "Language-code_Country-code",
such as "ja_JP". "Country code" is defined by ISO-3166.
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="locale"
type="j2ee:localeType"/>
<xsd:element name="encoding"
type="j2ee:encodingType"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:simpleType name="localeType">
<xsd:annotation>
<xsd:documentation>
The localeType defines valid locale defined by ISO-639-1
and ISO-3166.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:string">
<xsd:pattern value="[a-z]{2}(_|-)?([\p{L}\-\p{Nd}]{2})?"/>
</xsd:restriction>
</xsd:simpleType>
<!-- **************************************************** -->
<xsd:complexType name="login-configType">
<xsd:annotation>
<xsd:documentation>
The login-configType is used to configure the authentication
method that should be used, the realm name that should be
used for this application, and the attributes that are
needed by the form login mechanism.
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="auth-method"
type="j2ee:auth-methodType"
minOccurs="0"/>
<xsd:element name="realm-name"
type="j2ee:string" minOccurs="0">
<xsd:annotation>
<xsd:documentation>
The realm name element specifies the realm name to
use in HTTP Basic authorization.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="form-login-config"
type="j2ee:form-login-configType"
minOccurs="0"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="mime-mappingType">
<xsd:annotation>
<xsd:documentation>
The mime-mappingType defines a mapping between an extension
and a mime type.
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:annotation>
<xsd:documentation>
The extension element contains a string describing an
extension. example: "txt"
</xsd:documentation>
</xsd:annotation>
<xsd:element name="extension"
type="j2ee:string"/>
<xsd:element name="mime-type"
type="j2ee:mime-typeType"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="mime-typeType">
<xsd:annotation>
<xsd:documentation>
The mime-typeType is used to indicate a defined mime type.
Example:
"text/plain"
Used in: mime-mapping
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string">
<xsd:pattern value="[\p{L}\-\p{Nd}]+/[\p{L}\-\p{Nd}\.]+"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="nonEmptyStringType">
<xsd:annotation>
<xsd:documentation>
This type defines a string which contains at least one
character.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string">
<xsd:minLength value="1"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="security-constraintType">
<xsd:annotation>
<xsd:documentation>
The security-constraintType is used to associate
security constraints with one or more web resource
collections
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="display-name"
type="j2ee:display-nameType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="web-resource-collection"
type="j2ee:web-resource-collectionType"
maxOccurs="unbounded"/>
<xsd:element name="auth-constraint"
type="j2ee:auth-constraintType"
minOccurs="0"/>
<xsd:element name="user-data-constraint"
type="j2ee:user-data-constraintType"
minOccurs="0"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="servlet-mappingType">
<xsd:annotation>
<xsd:documentation>
The servlet-mappingType defines a mapping between a
servlet and a url pattern.
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="servlet-name"
type="j2ee:servlet-nameType"/>
<xsd:element name="url-pattern"
type="j2ee:url-patternType"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="servlet-nameType">
<xsd:annotation>
<xsd:documentation>
The servlet-name element contains the canonical name of the
servlet. Each servlet name is unique within the web
application.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:extension base="j2ee:nonEmptyStringType"/>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="servletType">
<xsd:annotation>
<xsd:documentation>
The servletType is used to declare a servlet.
It contains the declarative data of a
servlet. If a jsp-file is specified and the load-on-startup
element is present, then the JSP should be precompiled and
loaded.
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:group ref="j2ee:descriptionGroup"/>
<xsd:element name="servlet-name"
type="j2ee:servlet-nameType"/>
<xsd:choice>
<xsd:element name="servlet-class"
type="j2ee:fully-qualified-classType">
<xsd:annotation>
<xsd:documentation>
The servlet-class element contains the fully
qualified class name of the servlet.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="jsp-file"
type="j2ee:jsp-fileType"/>
</xsd:choice>
<xsd:element name="init-param"
type="j2ee:param-valueType"
minOccurs="0" maxOccurs="unbounded"/>
<xsd:element name="load-on-startup"
type="j2ee:xsdIntegerType"
minOccurs="0">
<xsd:annotation>
<xsd:documentation>
The load-on-startup element indicates that this
servlet should be loaded (instantiated and have
its init() called) on the startup of the web
application. The optional contents of these
element must be an integer indicating the order in
which the servlet should be loaded. If the value
is a negative integer, or the element is not
present, the container is free to load the servlet
whenever it chooses. If the value is a positive
integer or 0, the container must load and
initialize the servlet as the application is
deployed. The container must guarantee that
servlets marked with lower integers are loaded
before servlets marked with higher integers. The
container may choose the order of loading of
servlets with the same load-on-start-up value.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="run-as"
type="j2ee:run-asType"
minOccurs="0"/>
<xsd:element name="security-role-ref"
type="j2ee:security-role-refType"
minOccurs="0" maxOccurs="unbounded"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="session-configType">
<xsd:annotation>
<xsd:documentation>
The session-configType defines the session parameters
for this web application.
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="session-timeout"
type="j2ee:xsdIntegerType"
minOccurs="0">
<xsd:annotation>
<xsd:documentation>
The session-timeout element defines the default
session timeout interval for all sessions created
in this web application. The specified timeout
must be expressed in a whole number of minutes.
If the timeout is 0 or less, the container ensures
the default behaviour of sessions is never to time
out. If this element is not specified, the container
must set its default timeout period.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="transport-guaranteeType">
<xsd:annotation>
<xsd:documentation>
The transport-guaranteeType specifies that the communication
between client and server should be NONE, INTEGRAL, or
CONFIDENTIAL. NONE means that the application does not
require any transport guarantees. A value of INTEGRAL means
that the application requires that the data sent between the
client and server be sent in such a way that it can't be
changed in transit. CONFIDENTIAL means that the application
requires that the data be transmitted in a fashion that
prevents other entities from observing the contents of the
transmission. In most cases, the presence of the INTEGRAL or
CONFIDENTIAL flag will indicate that the use of SSL is
required.
Used in: user-data-constraint
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string">
<xsd:enumeration value="NONE"/>
<xsd:enumeration value="INTEGRAL"/>
<xsd:enumeration value="CONFIDENTIAL"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="user-data-constraintType">
<xsd:annotation>
<xsd:documentation>
The user-data-constraintType is used to indicate how
data communicated between the client and container should be
protected.
Used in: security-constraint
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="description"
type="j2ee:descriptionType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="transport-guarantee"
type="j2ee:transport-guaranteeType"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="war-pathType">
<xsd:annotation>
<xsd:documentation>
The elements that use this type designate a path starting
with a "/" and interpreted relative to the root of a WAR
file.
</xsd:documentation>
</xsd:annotation>
<xsd:simpleContent>
<xsd:restriction base="j2ee:string">
<xsd:pattern value="/.*"/>
</xsd:restriction>
</xsd:simpleContent>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:simpleType name="web-app-versionType">
<xsd:annotation>
<xsd:documentation>
This type contains the recognized versions of
web-application supported. It is used to designate the
version of the web application.
</xsd:documentation>
</xsd:annotation>
<xsd:restriction base="xsd:token">
<xsd:enumeration value="2.4"/>
</xsd:restriction>
</xsd:simpleType>
<!-- **************************************************** -->
<xsd:complexType name="web-appType">
<xsd:choice minOccurs="0" maxOccurs="unbounded">
<xsd:group ref="j2ee:descriptionGroup"/>
<xsd:element name="distributable"
type="j2ee:emptyType"/>
<xsd:element name="context-param"
type="j2ee:param-valueType">
<xsd:annotation>
<xsd:documentation>
The context-param element contains the declaration
of a web application's servlet context
initialization parameters.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="filter"
type="j2ee:filterType"/>
<xsd:element name="filter-mapping"
type="j2ee:filter-mappingType"/>
<xsd:element name="listener"
type="j2ee:listenerType"/>
<xsd:element name="servlet"
type="j2ee:servletType"/>
<xsd:element name="servlet-mapping"
type="j2ee:servlet-mappingType"/>
<xsd:element name="session-config"
type="j2ee:session-configType"/>
<xsd:element name="mime-mapping"
type="j2ee:mime-mappingType"/>
<xsd:element name="welcome-file-list"
type="j2ee:welcome-file-listType"/>
<xsd:element name="error-page"
type="j2ee:error-pageType"/>
<xsd:element name="jsp-config"
type="j2ee:jsp-configType"/>
<xsd:element name="security-constraint"
type="j2ee:security-constraintType"/>
<xsd:element name="login-config"
type="j2ee:login-configType"/>
<xsd:element name="security-role"
type="j2ee:security-roleType"/>
<xsd:group ref="j2ee:jndiEnvironmentRefsGroup"/>
<xsd:element name="message-destination"
type="j2ee:message-destinationType"/>
<xsd:element name="locale-encoding-mapping-list"
type="j2ee:locale-encoding-mapping-listType"/>
</xsd:choice>
<xsd:attribute name="version"
type="j2ee:web-app-versionType"
use="required"/>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="web-resource-collectionType">
<xsd:annotation>
<xsd:documentation>
The web-resource-collectionType is used to identify a subset
of the resources and HTTP methods on those resources within
a web application to which a security constraint applies. If
no HTTP methods are specified, then the security constraint
applies to all HTTP methods.
Used in: security-constraint
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="web-resource-name"
type="j2ee:string">
<xsd:annotation>
<xsd:documentation>
The web-resource-name contains the name of this web
resource collection.
</xsd:documentation>
</xsd:annotation>
</xsd:element>
<xsd:element name="description"
type="j2ee:descriptionType"
minOccurs="0"
maxOccurs="unbounded"/>
<xsd:element name="url-pattern"
type="j2ee:url-patternType"
maxOccurs="unbounded"/>
<xsd:element name="http-method"
type="j2ee:http-methodType"
minOccurs="0" maxOccurs="unbounded"/>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
<!-- **************************************************** -->
<xsd:complexType name="welcome-file-listType">
<xsd:annotation>
<xsd:documentation>
The welcome-file-list contains an ordered list of welcome
files elements.
Used in: web-app
</xsd:documentation>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="welcome-file"
type="xsd:string"
maxOccurs="unbounded">
<xsd:annotation>
<xsd:documentation>
The welcome-file element contains file name to use
as a default welcome file, such as index.html
</xsd:documentation>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
<xsd:attribute name="id" type="xsd:ID"/>
</xsd:complexType>
</xsd:schema>
